2011 Toyota Tacoma Oil Type and Capacities

Toyota recommends that for all oil changes in the 2011 Toyota Tacoma, genuine Toyota motor oil is used.

I have done the work for you and found genuine oil and filter products on Amazon to make it that much easier for you.

The 2011 Toyota Tacoma takes 6.1 q of 0W-20 for 2.7 L engines and 4.8/5.5 q of 5W-30 for 4.0 L engines.

EngineOil TypeCapacityFilter
2.7 L (2TR-FE)0W-206.1 q (5.8 L)Toyota Oil Filter 90915-YZZG2
4.0 L (1GR-FE)
2WD
5W-304.8 q (4.5 L)Toyota Oil Filter 90915YZZD3
4.0 L (1GR-FE)
4WD/Prerunner
5W-305.5 q (5.2 L)Toyota Oil Filter 90915YZZD3
2011 Toyota Tacoma Oil Capacity, Type and Filter Type

If Toyota engine oil is not available, an oil that meets the ILSAC-GF-5 multigrade oil specifications can be used.

Looking for an oil change?

We have some special offers for our readers for oil changes at Valvoline!

Click each offer below to redeem

8 off full service valvoline official offer
20 percent off valvoline services official offer

Additionally, Toyota states that if SAE 0W-20, or 5W-30 is not available, 5W-20 or 10W-30 can be used in its place, respectively, but should only be used one change in a row.

The information provided in this article was taken from the 2011 Toyota Tacoma owner’s manual unless otherwise stated. It is your responsibility to make sure you use the appropriate oil in your truck.

2011 toyota tacoma oil type and capacities

2.7 L 2TR-FE I-4 Engine

The 2011 Toyota Tacoma 2.7 L engine requires 6.1 q of 0W-20 engine oil.

It also requires 90915-YZZG2 Toyota Engine Oil Filter.

This engine is a 4 cylinder in-line engine.

Filter information was found from Parts.toyota.com at the following source: 2011 Toyota Tacoma Engine Oil Filter – 90915-YZZG2

Toyota 0W 20 Oil 12 pk

Toyota 0W-20 Engine Oil

Amazon Affiliate Link

Engine oil for 2.7 L 2011 Toyota Tacoma

90915YZZG2 engine oil filter toyota

Toyota 90915-YZZG2 Engine Oil Filter

Amazon Affiliate Link

Engine oil filter for 2.7 L 2011 Toyota Tacoma

How to change oil in 2.7 L 2011 Tacoma?

4.0 L 1GR-FR V6 Engine

The 2011 Toyota Tacoma 4.0 L engine requires 4.8 q (2wd) or 5.5 q (4WD/Prerunner) of 5W-30 engine oil.

It also requires the Toyota Oil Filter 90915YZZD3. Engine oil filter source: 90915YZZD3 (Toyota.com)

The 1GR-FE engine is a 6 cylinder V type engine.

toyota genuine oil 5w 30-min

Toyota 5W-30 Engine Oil

Amazon Affiliate Link

Engine oil for 4.0 L 2011 Toyota Tacoma

90915YZZD3 oil filter toyota-min

Toyota 90915-YZZD3 Engine Oil Filter

Amazon Affiliate Link

Engine oil filter for 4.0 L 2011 Toyota Tacoma

How to change oil in 4.0 L 2011 Tacoma?

Looking for an oil change?

We have some special offers for our readers for oil changes at Valvoline!

Click each offer below to redeem

8 off full service valvoline official offer
20 percent off valvoline services official offer

JOEY TECCHI

I, Joey, am the owner and primary writer for Tailored Trucks. When I'm not writing, I enjoy taking my RAM pickup to the White Mountains for skiing, camping, or ATVing. Thanks for reading!

Leave a Comment