2010 Ford Ranger Towing Capacity (All Variations)

If you have a 2010 Ford Ranger and need to know your truck’s towing capacity, you have come to the right place.

Here you will find all the GCWRs and max trailer towing weights suggested by Ford. The information is combined with the 2010 Ford Ranger eBrochure and the 2010 Ford Trailer Towing Guide.

The 2010 Ford Ranger has a max trailer towing capacity of 5,940 lbs. This is for properly equipped vehicles with no cargo.

Ford says that the tongue weight for any towing should be no more than 10% of the trailer weight. So this should be taken into account when setting up your trailer.

Though I tried to make this information as accurate as possible, you should always check your manual or contact your local dealer to determine the appropriate towing capacity of your vehicle and necessary equipment.

2010 ford ranger towing capacity featured image

Trims

There are 3 trims in the 2010 Ranger series.

  • XL
  • XLT
  • Sport

The main differences between these trims are the mechanical features, appearance options, and packages.

All the differences can be seen in the e-brochure.

Cab and Bed Sizes

The cab can either be a Regular Cab or a SuperCab.

The Regular Cab and the Super Cab can support two different rows of passengers.

Bed Sizes

There is only one length available in the 2010 Ford Ranger. This is the 6-ft bed.

Packages

The Ford Ranger has one towing trailer package available. This is the Trailer Tow Package. It is recommended for all light trucks that will be used for towing to help ensure easy and proper connection of trailer lights.

Trailer Tow Package

The Ford Ranger Trailer Tow Package comes with:

  • 4-pin Trailer Wiring Harness
  • Standard Trailer Hitch Receiver
  • Aux Auto Trans. Oil Cooler (Standard with the 4.0L engine only)

Towing Capacity by Engine

There are two engines available on the 2010 Ford Ranger. This is the 2.3 L EcoBoost L4 engine with 270 hp and 310 lb.-ft of torque and the 4.0L V6 Engine with 207 hp @ 5,250 rpm, as well as a torque of 238 @ 3,000 rpm.

2.3L DOCH L4

The 2.3 L DOHC L4 engine is a 10-speed automatic transmission engine with 143 hp @ 5,250 rpm, as well as a torque of 154 @ 3,750 rpm. Its towing capacity ranges from 1,320 – 2,160 lbs.

Towing CapacityGCWR
Regular Cab
4×2
6-ft/7-ft bed
Automatic Transmission
2,1605,500
Supercab
4×2
6-ft bed
Automatic Transmission
1,9805,500
Regular Cab
4×2
6-ft/7-ft bed
Manual Transmission
1,540/1,5004,800
Supercab
4×2
6-ft bed
Manual Transmission
1,3204,800
2010 Ford Ranger 2.3L DOHC L4 Engine Towing Capacity

4.0L SOHC V6 L4

The 4.0 L SOHC V6 is a 10-speed automatic transmission engine with 207 hp @ 5,250 rpm, as well as a torque of 238 @ 3,000 rpm. Its towing capacity ranges from 3,080 – 5,940 lbs.

Axle RatioTowing CapacityGCWR
Supercab
4×2
6-ft bed
Automatic Transmission
3.555,9409,500
Supercab
4×2
6-ft bed
Automatic Transmission
3.555,7609,500
Supercab
4×4
6-ft bed
Automatic Transmission
3.73/4.105,5409,500
Super Cab
4×2
6-ft box
Manual Transmission – Ranger Sport
3.553,300/3,2207,000
Super Cab
4×4
6-ft box
Manual Transmission
3.73/4.103,0807,000
2010 Ford Ranger 4.0L SOHC V6 Towing Capacity

2010 Ford Ranger Towing Capacity Chart

The following chart is from the trailer tow guide from the Ford brochure.The maximum towing capacity for the 2010 Ford Ranger is 5,940 lbs.

2010 FORD RANGER TOWING CAPACITY CHART
2010 FORD RANGER TOWING CAPACITY CHART

Payload Capacity

The best way to check the payload capacity is to find the GVWR listed on the certification sticker inside the driver’s side door. But they are mentioned in the e-brochure and trailering guide.

2.3L DOHC I-4

The maximum payload capacity for the 2010 Ford Ranger with the 2.3l DOHC Engine ranges from 1,160 lbs to 1,400 lbs.

Bed SizePayload CapacityGVWR
Regular Cab
4×2
6-ft1,1604,300
Super Cab
4×2
6-ft1,4004,760
2010 Ford Ranger 2.3L DOHC l4 Engine Payload Capacity

4.0L V6

The maximum payload capacity for the 2010 Ford Ranger with the 4.0L V6 Engine ranges from 1,100 lbs to 1,430 lbs.

Bed SizePayload CapacityGVWR
Super Cab
4×2
6-ft1,100/1,2704,760/5,150
Super Cab
4×2/4×4
With Payload Package 2
6-ft1,430/1,4005,100/5,280
2010 Ford Ranger 4.0L V6 Engine Payload Capacity

Rear Step Bumper Towing vs. Hitch Receiver Towing

However, even if you have a hitch receiver, this does not mean you can tow the above capacities. You first need a proper hitch receiver (standard) and a weight-distributing trailer hitch if towing above 5,000 lbs.

You can, however, tow with the 2010 Ford Ranger through a step bumper ball hitch. This can hold up to 2,000 lbs (with a weight-carrying trailer).

In either case with a weight-carrying trailer or weight-distributing trailer, the tongue weight should not exceed 10% of the total trailer weight (according to the Trailer Tow Guide).

Weight Carrying Trailer Capacity
(Max Tongue Load)
Rear bumper2,000 lbs
(200 lbs)
Hitch Receiver3,500 lbs
(350 lbs)
Max Tongue Load and Trailer Capacity for Rear Step Bumper and Hitch Receivers on 2010 Ford Ranger

Additional Resources

Conclusion

Ford states that the 2010 Ford Ranger has a max towing capacity of 1,320 to 5,940 lbs.

Though this guide provides good guidance on how much you can tow with your 2010 Ford Ranger, you should always calculate your own towing capacity.

Not sure how? Read: How is Towing Capacity Calculated? Here you will find a helpful calculator as well.

Leave a Comment