There are a number of versions of the Ford Ranger between trims, cab sizes, bed sizes, and additional packages.
However, there is only 1 type of engine.
What type of oil does the 2020 Ford Ranger take?
Ford recommends that the 2020 Ford Ranger takes 6.2 quarts (5.9 L) of 5W-30 oil with the FL-910-S Motorcraft oil filter.
| Oil Type | Oil Capacity | Filter | |
| 2.3 L | SAE 5W-30 | 6.2 qt (5.9 L) | FL-910-S |
Looking for an oil change?
We have some special offers for our readers for oil changes at Valvoline!
Click each offer below to redeem
After reading this, you’ll have everything you need to perform your own oil change!
The information taken for this article was taken from the 2020 Ford Ranger owner’s manual.
2020 Ford Ranger 2.3 L Oil Type, Capacity, & Filter
The 2.3 L EcoBoost I4 engine in the 2020 Ford Ranger takes 6.2 qt of SAE 5W-30 engine oil and the Motorcraft FL-910-S Oil Filter.
Ford recommends that you use the Motorcraft version of these two items, which I’ve found on Amazon below, but I believe as long as you choose to use synthetic blend oil with an appropriately sized oil filter, you should have no problems.
Motorcraft 5W-30 Engine Oil
Amazon Affiliate Link
Engine oil for 2.3 L EcoBoost in 2020 Ford Ranger
Motorcraft FL-910-S Engine Oil
Amazon Affiliate Link
Engine oil filter for 2.3 L EcoBoost in 2020 Ford Ranger
Ford mentions that for this engine, if you plan to run frequently at cold starts (or running at extremely cold temperatures) you should use SAE 0W-30.
How often should you change your Ford Ranger Oil?
According to the 2020 Ford Ranger manual, under normal usage conditions, the oil in your truck should be changed around every 7,500 but no more than 1 year.
There is an oil change indicator system that should provide a guide as to when the oil should be changed. At a maximum, you should never change your oil with more than 10,000 miles or one year between changes.
There are also conditions that can change this recommendation and they are listed in the owner’s manual and should be referenced.
You should change the oil within 500 miles or two week of the indicator going off.
Every time you perform an oil change you should also:
- inspect wheels
- rotate tires
- check transmission fluid level
- check brakes
You may also like: How long can you go without an oil change before it’s too late!
Looking for an oil change?
We have some special offers for our readers for oil changes at Valvoline!
Click each offer below to redeem
Selecting the right oil for your 2020 Ford Ranger
Follow the link below to buy the right oil type for your engine.
| Oil Type | Oil Capacity | Filter | |
| 2.3 L | SAE 5W-30 | 6.2 qt (5.9 L) | FL-910-S |
If you do not choose to buy the recommended Motorcraft oil by Ford, you should try to always buy a synthetic blend of oil with one that has the API-certified logo on it.
This will ensure that the oil you are putting in your car conforms to the engine, emission system, and fuel economy standards set by the International Lubricants Specification Advisory Council.
And lastly, DO NOT USE SUPPLEMENTAL ENGINE OIL ADDITIVES!
For more information about your truck, take a look at the Owners manual here.
