2010 Ford F150 Oil Type and Capacities

The 2010 Ford F150 takes SAE 5W-20 oil in all engine types. Ford recommends this as the only oil to use in these engine types according to their owner’s manual.

This type of engine oil will improve fuel economy and performance durability.

The engine sizes are either 6 or 7 quarts for the 4.6 L and 5.4 L engines respectively.

See the table below for the oil type, capacity, and filter recommendations taken straight from Ford.

	Oil Type	Oil Capacity	Oil Filter
4.6 L 2V V8	5W-20	6.0 q	FL-820-S
4.6 L 3V V8	5W-20	6.0 q	FL-820-S
5.4 L V8	5W-20	7.0 q	FL-820-S

When looking at the 2010 Ford F150 owner’s manual, they suggest that you always use the Motorcraft brand of oil and oil filters.

You may also like: How long can you go without an oil change before it’s too late?

They say that this brand is designed to function perfectly with your F150 and can increase the longevity of your engine.

However, they do specify that this is not an absolute requirement. So long as you use an oil “Certified For Gasoline Engines” by the API (American Petroleum Institute) and ILSAC (International Lubricant Standardization and Approval Committee), you should be fine.

They do mention that using the Motorcraft brand will protect the car warranty.

4.6 L 2V V8 Engine

The 4.6 L 2V V8 engine in the 2010 Ford F150 engine requires 6.0 q of SAE 5W-20 oil with a Motorcraft FL-820-S oil filter.

4.6 L 3V V8 Engine

The 4.6 L 3V V8 engine in the 2010 Ford F150 engine requires 6.0 q of SAE 5W-20 oil with a Motorcraft FL-820-S oil filter.

5.4 L V8 Engine

The 5.4 L V8 engine in the 20010Ford F150 engine requires 7.0 q of SAE 5W-20 oil with a Motorcraft FL-820-S oil filter.